Canopy System A | 1200 mm Projection | Round Wall Plate | Set for 1 Axis | Stainless Steel

V2A Canopy Universal System, Large - Base Set A for 1 Axis - For 1200 mm Projection

Scope of delivery:

• Point fixing: For plate thickness 17.52 - 21.52 mm | domed holder Ø 72 mm | material 1.4301 (V2A / AISI 304)
• Wall plate: Round Ø 120 x 10 mm | holes 2 x 13 mm | centre hole Ø 10.5 mm | material 1.4301
• Tie rod: Large Ø 16 mm for 1200 mm projection | material 1.4301
• Dimension A = 880 mm; Dimension B = 37 mm; Dimension C = 40-50 mm; Dimension D = 1170 mm; Dimension E = 40-50 mm; Dimension F = 80-85 mm; Dimension G = 80 mm; Dimension H = 920 mm; Dimension I = 200 mm; Dimension J = 47 mm; Dimension K = 35°

Special features:

The base set includes all individual parts for 1 axis, including the tie rod.

If necessary, determine glass thickness, layout and number of axes via individual structural calculations.

Intended glass thickness 17.52 mm or 21.52 mm (laminated safety glass of 2 x 8 mm or 2 x 10 mm heat-strengthened glass + 4 x PVB film 0.38 mm).

The projection of the system can be adjusted by +/- 50 mm by changing the front dimension I. For the exact dimensions of this system, please refer to the last page of the installation instructions.

The maximum distance between 2 axes should not exceed 1100 mm to DIN 18008. There should be at least 80 mm and at most 300 mm between the outer edge of the glass bore and the edge of the glass pane. This generally results in a maximum pane width of 1700 mm when using 2 axes.