Canopy System A | 1500 mm Projection | Round Wall Plate | Set for 1 Axis | Stainless Steel

V2A Universal Canopy System Large - Base Set A for 1 Axis - For 1500 mm Projection

Scope of delivery:

• Point fixing: For panel thickness 17.52 – 21.52 mm | domed holder Ø 72 mm | material 1.4301
• Wall plate: Round Ø 120 x 10 mm | perforation 2 x 13 mm | centre hole Ø 10.5 mm | material 1.4301
• Tie rod: Large Ø 16 mm for 1500 mm projection | material 1.4301
• Dimension A = 1100 mm; Dimension B = 37 mm; Dimension C = 40-50 mm; Dimension D = 1540 mm; Dimension E = 40-50 mm; Dimension F = 80-85 mm; Dimension G = 80 mm; Dimension H = 1220 mm; Dimension I = 200 mm; Dimension J = 47 mm; Dimension K = 35°

Special features:

The base set includes all individual parts for 1 axis, including the tie rod.

If necessary, determine glass thickness, arrangement and number of axes via individual structural calculation.

Intended glass thickness 17.52 mm or 21.52 mm (laminated safety glass from 2 x 8 mm or 2 x 10 mm heat-strengthened glass + 4 x PVB film 0.38 mm).

The projection of the system can be adjusted by +/- 50 mm by changing the front dimension I. Please refer to the last page of the installation instructions for the exact dimensions of this system.

The maximum dimension between 2 axes should not exceed 1100 mm in accordance with DIN 18008. Between the outer edge of the glass bore and the edge of the glass pane there should be a minimum of 80 mm and a maximum of 300 mm. This generally results in a maximum pane width of 1700 mm when using 2 axes.