Canopy System B | 1200 mm Projection | Square Wall Plate | Set for 1 Axis | Stainless Steel

V2A Universal Canopy System Large - Base Set B for 1 Axis - For 1200 mm Projection

Scope of delivery:

• Point fixing: For plate thickness 17.52 - 21.52 mm | straight bracket Ø 72 mm | material 1.4301
• Wall plate: Square 150 x 50 x 8 mm | perforation 2 x 13 mm | centre hole Ø 10.5 mm | material 1.4301
• Tie rod: Large Ø 16 mm for 1200 mm projection | material 1.4301
• Dimension A = 880 mm; Dimension B = 37 mm; Dimension C = 40-50 mm; Dimension D = 1170 mm; Dimension E = 40-50 mm; Dimension F = 80-85 mm; Dimension G = 80 mm; Dimension H = 920 mm; Dimension I = 200 mm; Dimension J = 47 mm; Dimension K = 35°

Special features:

The base set includes all individual components for 1 axis, including the tie rod.

Glass thickness, layout and number of axes may need to be determined by individual structural calculation.

Intended glass thickness 17.52 mm or 21.52 mm (laminated safety glass from 2 x 8 mm or 2 x 10 mm heat-strengthened glass + 4 x PVB film 0.38 mm).

The projection of the system can be adjusted by +/- 50 mm via the front dimension I. Please refer to the last page of the installation instructions for the exact dimensions of this system.

The maximum distance between 2 axes should not exceed 1100 mm in accordance with DIN 18008. Between the outer edge of the glass bore and the edge of the glass pane, there should be a minimum of 80 mm and a maximum of 300 mm. This generally results in a maximum pane width of 1700 mm when using 2 axes.