Canopy System B | 1500 mm Projection | Square Wall Plate | Set for 1 Axis | Stainless Steel

V2A Universal Canopy System Large - Base Set B for 1 Axis - For 1500 mm Projection

Scope of delivery:

• Point fixing: For panel thickness 17.52 – 21.52 mm | straight holder Ø 72 mm | material 1.4301
• Wall plate: Square 150 x 50 x 8 mm | perforation 2 x 13 mm | centre hole Ø 10.5 mm | material 1.4301
• Tie rod: Large Ø 16 mm for 1500 mm projection | material 1.4301
• Dimension A = 1100 mm; Dimension B = 37 mm; Dimension C = 40-50 mm; Dimension D = 1540 mm; Dimension E = 40-50 mm; Dimension F = 80-85 mm; Dimension G = 80 mm; Dimension H = 1220 mm; Dimension I = 200 mm; Dimension J = 47 mm; Dimension K = 35°

Special features:

The base set contains all individual parts for 1 axis including the tie rod.

If required, determine glass thickness, arrangement and number of axes via individual structural analysis.

Intended glass thickness 17.52 mm or 21.52 mm (laminated safety glass from 2 x 8 mm or 2 x 10 mm heat-strengthened glass + 4 x PVB film 0.38 mm).

The projection of the system can be varied by +/- 50 mm by adjusting the front dimension I. Please refer to the last page of the installation instructions for the exact dimensions of this system.

The maximum dimension between 2 axes should not exceed 1100 mm to DIN 18008. Between the outer edge of the glass bore and the edge of the glass pane there should be a minimum of 80 and a maximum of 300 mm. This generally results in a maximum pane width of 1700 mm when using 2 axes.