Gate Hinge | M12 | with Weld-On Tab | Stainless Steel Components | Steel

Hybrid Hinge M12 with Weld-On Tab | 2-Way Adjustable | Stainless Steel / Untreated Steel

This high-quality hybrid hinge M12 with weld-on tab is ideal for securely mounting light to medium-weight steel, yard and garden gates. The 2-way adjustable design of the gate hinge allows precise alignment of the gate leaf. The complete set consists of add-on parts in stainless steel 1.4301 (V2A) as well as weld-on tabs in untreated steel, enabling quick and stable installation.

Material & finish

• Add-on parts (eye bolt, clevis pin, screws, nuts, washers): stainless steel 1.4301 (V2A)
• Finish of add-on parts: bright / stainless steel
• Finish of weld-on tabs: untreated steel (for welding)

Scope of delivery

• Eye bolt M12 in stainless steel 1.4301
• Clevis pin in stainless steel 1.4301
• Fastening screw in stainless steel 1.4301
• Nuts in stainless steel 1.4301
• Washers in stainless steel 1.4301
• Weld-on tabs in untreated steel

Adjustment & function

• 2-way adjustable gate hinge for exact alignment of the gate leaf
• Removable clevis pin – gate can be easily lifted off
• Suitable for welded steel structures

Possible load capacities (guide value with 2 gate hinges per gate leaf)

The permissible gate load depends on the gate width and the installation situation. For a gate width of approx. 1,000 mm the following guide value applies:

• M12 – up to approx. 100 kg per gate leaf

Note: For narrower gates (e.g. 500 mm) higher loads are possible; for wide gates (e.g. 2,000 mm) the permissible load capacity is reduced accordingly. We are happy to advise you on the right dimension.

Special notes

• Load capacity figures apply when using 2 gate hinges per gate leaf
• Take into account additional loads from wind, door closers or large gate widths
• For heavy or wide gates we recommend stronger hinge dimensions or the use of 3 gate hinges