Stainless steel canopy system large - basic set A for 1 axle
- Projection: 1200 mm
- Wall plate: Ø 120 x 10 mm
- Bracket curved: Ø 72 mm
Available, delivery time: 1-3 days
- Free shipping on orders over €250 net
- Order by 12 PM Monday-Friday for same-day shipping
- Professional advice
- Convenient purchase on account
V2A canopy universal system large - Basic set A for 1 axis - For projection 1200 mm
Scope of delivery:
- Point bracket: For panel thickness 17.52 - 21.52 mm | bracket curved Ø 72 mm | material 1.4301
- Wall plate: Round Ø 120 x 10 mm | perforation 2 x 13 mm | center hole Ø 10.5 mm | material 1.4301
- Pull rod: Large Ø 16 mm for projection 1200 mm | Material 1.4301
Special features:
The basic set contains all individual parts for 1 axis including the pull rod.
If necessary, determine the glass thickness, arrangement and number of axles using individual structural analysis.
Intended glass thickness 17.52 mm or 21.52 mm (VSG made of 2 x 8 mm or 2 x 10 mm TVG + 4 x PVB foil 0.38 mm).
The projection of the system can be changed by adjusting the front dimension I by +/- 50 mm. Please refer to the last page of the installation instructions for the exact dimensions of this system.
The maximum dimension between 2 axes should not exceed 1100 mm in accordance with DIN 18008. There should be a minimum of 80 mm and a maximum of 300 mm between the outer edge of the glass hole and the edge of the glass pane. This results in a maximum pane width of 1700 mm when using 2 axes.
| Glass thickness: | 17,52mm, 21,52mm |
|---|---|
| Material: | V2A |
| Projection: | 1200mm |
| Wall panel: | Round |
| Wall panel size: | 120 x 10mm |
Login
Customers have also seen
- Projection: 1000 mm
- Wall plate: Ø 120 x 10 mm
- Bracket curved: Ø 72 mm
To order this product, please log in here.
- Projection: 1500 mm
- Wall plate: Ø 120 x 10 mm
- Curved bracket: Ø 72 mm
To order this product, please log in here.