Free shipping in Germany for orders over €250 net
Order by 12 PM Monday-Friday for same-day shipping
info@beurskens.de
Hotline +49 (0) 2834-94380

Stainless steel canopy system large - basic set B for 1 axle

V2A canopy universal system large - Basic set B for 1 axis - For projection 1500 mm

Scope of delivery:

  • Point bracket: For panel thickness 17.52 - 21.52 mm | bracket straight Ø 72 mm | material 1.4301
  • Wall plate: Square 150 x 50 x 8 mm | perforation 2 x 13 mm | center hole Ø 10.5 mm | material 1.4301
  • Pull rod: Large Ø 16 mm for projection 1500 mm | Material 1.4301

Special features:

The basic set contains all individual parts for 1 axis including the pull rod.

If necessary, determine the glass thickness, arrangement and number of axles using individual structural analysis.

Intended glass thickness 17.52 mm or 21.52 mm (VSG made of 2 x 8 mm or 2 x 10 mm TVG + 4 x PVB foil 0.38 mm).

The projection of the system can be changed by adjusting the front dimension I by +/- 50 mm. Please refer to the last page of the installation instructions for the exact dimensions of this system.

The maximum dimension between 2 axes should not exceed 1100 mm in accordance with DIN 18008. There should be a minimum of 80 mm and a maximum of 300 mm between the outer edge of the glass hole and the edge of the glass pane. This results in a maximum pane width of 1700 mm when using 2 axes.

Properties "Stainless steel canopy system large - basic set B for 1 axle"
Glass thickness: 17,52mm, 21,52mm
Material: V2A
Projection: 1500mm
Wall panel: Square
Wall panel size: 150 x 50mm
Datasheets
Installation instructions for tension rod canopy

Oops! Your browser doesn't support PDFs!

Recommended dimensions

Oops! Your browser doesn't support PDFs!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers have also seen

Stainless steel canopy system large - basic set A for 1 axle
  • Projection: 1500 mm
  • Wall plate: Ø 120 x 10 mm
  • Curved bracket: Ø 72 mm
Product number: 43312

To order this product, please log in here.

Stainless steel canopy system small - basic set C for 1 axle
  • Projection: 650 mm
  • Wall plate: Ø 105 x 8 mm
  • Curved bracket: Ø 52 mm
Product number: 43320

To order this product, please log in here.

Stainless steel canopy system large - basic set B for 1 axle
  • Projection: 1200 mm
  • Wall plate: 150 x 50 x 8 mm
  • Flat bracket: Ø 72 mm
Product number: 43316

To order this product, please log in here.

V2A canopy blade system - basic set H for 1 axle
  • Projection: 1000 mm
  • Wall plate: Ø 60 x 4 mm
  • Flat bracket: Ø 72 mm
Product number: 43357

To order this product, please log in here.

Steel construction hinge - length 120 mm
Material St 37-2 / S235 | Surface of the welded parts raw
Product number: 50073

To order this product, please log in here.

Steel canopy blade system - basic set H for 1 axle
  • Projection: 1000 mm
  • Wall plate: Ø 60 x 4 mm
  • Flat bracket: Ø 72 mm
Product number: 43350

To order this product, please log in here.