V2A canopy universal system large - basic set B for 1 axis -
Point bracket for panel thickness 17.52 - 21.52 mm | bracket straight Ø 72 mm | material 1.4301
Wall plate angular 150 x 50 x 8 mm | perforation 2 x 13 mm | center hole Ø 10.5 mm | material 1.4301
Large pull rod Ø 16 mm for projection 1200 mm | Material 1.4301
The basic set contains all individual parts for 1 axis including the pull rod
If necessary, determine the glass thickness, arrangement and number of axles using individual structural analysis. Intended glass thickness 17.52 mm or 21.52 mm (VSG made of 2 x 8 mm or 2 x 10 mm TVG + 4 x PVB foil 0.38 mm).
The projection of the system can be changed by adjusting the front dimension I by +/- 50 mm. Please refer to the last page of the installation instructions for the exact dimensions of this system.
The maximum dimension between 2 axes should not exceed 1100 mm in accordance with DIN 18008. There should be a minimum of 80 mm and a maximum of 300 mm between the outer edge of the glass hole and the edge of the glass pane. This results in a maximum pane width of 1700 mm when using 2 axes.
Glass thickness: | 17,52 mm, 21.52 mm |
---|---|
Material: | V2A |
Throat: | 1200 mm |
Wall panel: | Angular |
Wall panel size: | 150 x 50 x 8 mm |
0 of 0 reviews
Login